TESCOM™ ER5000 SERIES ELECTROPNEUMATIC ACTUATOR

The ER5000 Series is a microprocessor based PID (Proportional, Integral, Derivative) controller that brings precise algorithmic pressure control to a wide range of applications. It can be used as a standalone unit to control the pressure of inert gases or natural gas from 0 to 100 psig / 0 -6.9 bar, or be connected to any pneumatically actuated regulator. When used with regulators, the ER5000 provides pressure control of gases and liquids from vacuum to 30,000 psig / 2068 bar.

Download :
TESCOM ER5000 Series

Specifications

Power Requirement 22 to 28.5 VDC, 340 mA maximum, 180 mA nominal
Supply Requirement Media Type:
ER5000 – Clean, dry inert gas or instrument grade air
ERNG – Natural gas
Minimum: Outlet pressure + 1 psig / 0.07 bar
Maximum: 120 psig / 8.2 bar
Nominal: 110 psig / 7.5 bar
Housing Rating Standard: NEMA 4X IP66 (aluminum and epoxy polyester paint)
Optional: Stainless Steel body available for Explosion proof models
Flow Stream Materials (Solenoids & Sensors) Solenoids: Nickel-plated Brass, FKM Seat and O-rings
Sensors: Glass, Ceramic, Silicon, RTV, Nickel
Flow Stream Materials (Manifold) Glass Filled PET (Explosion Proof only)
Flow Stream Materials (Tubing) Polyurethane
Flow Stream Materials (Plug) Brass
Flow Stream Materials (O-Rings) Silicone, Buna-N, FKM
Flow Stream Materials (Fittings) Stainless Steel
Port Size & Type Gas Ports (Inlet, Exhaust & Gauge): 1/8 – 27 NPTF
Controlled Outlet Port: 1/2 inch SAE
Conduit Openings: Two, 1/2 inch NPTF
Operating Temperature Range -22°F to 167°F / -30°C to 75°C (media require below 32°F)
Flow Capacity Cv = 0.01
Weight 3.1 lbs / 1.4 kg
Additional Information For custom modifications or a complete system solution, please contact your local sales office.
Scroll to Top